In one case, in the erstwhile of my first cigar experience, I bought two Punches from the store. I was 16 then and forbidden to smoke. Duh!
So, I waited for the night to light it up and to have my first cigar. When everyone was asleep, my best friend and I fired up the cigar and started to take a puff. We were new, but we could smell a problem with the cigars after few puffs because we were not getting any smoke from the cigars.
My friend started to heck out of me that I had bought a corky one. After around 5-7 of bizarre minutes, my friend sorted out a way to take the puffs. He cut the inner-mouth end of the cigars with my pen-knife. I have to admit that it was a very hefty task. Then we could take the puff and fill our breaths with sweet cigar-smoke. That was roughly 16 years ago, and I still feel that it was only a couple of years ago and start to laugh at our foolishness.
Six years after that when I start to smoke cigar regularly, my friend gave me a special cutter which cuts the cigars, as, in most of the cigars, one end is closed to seal the moisture and flavor of it while aging.
So, a cigar cutter is a daily grind for having a decent cut cigar. Knife or other sharp material can cut it too. However, they won’t come as pretty as cigar-cutter-cut one. Many of the cigar cutters are forthcoming in the stores, and you can randomly pick one. However, when you are talking about quality-investment, a proper guide is necessary. Therein my review on best cigar cutter will give you a complete demonstration about 14 cigar cutters which are classified and of low cost hence best in the market.
check out our quick selection of best cigar cutter from all types:
Colibri V-shape Cigar Cutter
Xikar XO Cigar Cutter
Large Table-Top V Cut & Guillotine Cigar Cutter
JIFENG® Zig-Zag Ripple Carving Cigar Punch
Colibri V-shape Cigar Cutter
Xikar XO Cigar Cutter
Large Table-Top V Cut & Guillotine Cigar Cutter
Why Do You Need a Cigar Cutter?
Is a cigar cutter so much necessary that I have to spend handful money on it? What if I cut them with a general knife? That would not be a problem, right?
No, it would be, and you are thinking wrong!
Spending on a cigar cutter is as necessary as buying a cigar humidor. A cigar humidor may keep your cigars fresh and alive for a couple of years. But when you are testing those aged cigars, the cigars must have a proper cut for smooth drawing.
Generally, a cigar is a roll of bundled tobacco leaves and loose tobacco leaves. So, in a cigar, a binder figure is obligatory to hold the leaves inside the wrapper. And here comes our cigar cap what grasps all the things together.
Most of the cigars come with uncut caps which make them tricky to inhale. For unstraining the procedure, the cap is trimmed in many different shapes. V-shape angle cut, flat cut, long hole, deep punch; the caps are cut vividly according to the urge of the owner.
Therefore, the nicotine of the tobacco blocks the pores sometimes. Then the cigar cutter comes in rescue, though the different types are used to canalize the cigar.
What Happens without A Cigar Cutter?
In brief, nothing for a caveman and everything for a good smoker.
Why did I say so? I said that because I met a guy in a cigar shop at our locality one night. I was looking for some pep talk and tasting a new cigar. So, I pinged the guy next to me and started to talk about the Martini belicoso which he was enjoying. After talking couples of minutes, I found out that the man was a cigar nerd and could not go an hour without a stogie. During our little chat, he finished his cigar and lighted a new one. The most surprising matter was that he used a key to make a hole in his cigar and when I asked him about that, he told me that he never used a cutter.
But in my case, I need my Churchill with an acute and sharp cut which makes a thin inhaling cap in my cigar. Anyhow, I need a V-cutter to make the particular tip.
So, the belicoso guy did not (I am sure that he still does not) need a cigar trimmer, but I have to admit that he is not a caveman and I liked the guy very much. Comparatively, I cannot go with a stogie without my cutter. If I do not use the cutter (as I tried to do so with my four to five stogies), I will end up with a cracked wrapper and a loose cap with oozy tobacco.
Who wants that, right?
When someone does not use a cigar trimmer, he meets with a stubborn draw in puffing and maybe with a broken cap or cracked wrapper.
What is to Consider Before Buying A Cigar Cutter?
So, cigar cutter is de rigueur for a smoker to prepare his cigar. One among thousand may avoid it, but nine hundred and ninety-nine of them need it indeed.
Considering some points while buying a cig cutter is a wise move especially when you are investing your pocketful notes on it. After all who wants to buy a cigar cutter which is useless? And the horrifying matter is that there are plenty of cigar cutter types in the market which makes it more confusing to pick one.
That is why keep in mind these following things which are fundamental data about purchasing a cigar cutter.
Blade quality is the things which should be kept in the first of priorities. Design, the material of blade frame, brands, price- nothing matters if the blade loses its sharpness after using for a few months. So, whatever you see or want, try to know about the blade quality of the cigar cutter.
To know about the quality of a cutter blade, at first, you have to know about the material from which it has been made. Stainless steel, cast iron are the best materials for a blade as they are rustproof and have the re-sharpening ability.
Cigars Type and Size
For the most part, a cigar cutter depends on your cigar category. It would be so idiotic if you try to punch your presidente with a V-shape cutter or puncher.
Before buying a cigar cutter, consider your cigar size. Possibly all of us went through the one cutter which was out of use because of its cutting diameter. Either it was bigger or smaller than our cigar size.
Many people burst forth on a particular style or design or over the low price of a cutter without thinking about the necessity of the cigar cutter of that diameter size. I don’t know why people do so even when knowing that their money is precious.
Most of us stick to one brand of cigar. So, it is wise that you know the ring gauze of our cigar to confirm that the cutter can cut the cigar of the particular dia.
For the most part, a cigar cutter depends on your cigar category. It would be so idiotic if you try to punch your presidente with a V-shape cutter or puncher.
Frame material also should be considered. Metal frame, wood frame, ivory frame and many different types of materials are used as frames. They are all good. However, metal framed or bone framed cutter has a high price range. Comparatively, wooden framed are of more affordable. Therefore, the price also depends on the brands. So, a wood mounted cigar cutter can be of a high rate.
Types of Cigar Cutters and Your Requirements
Not everyone like their cigar cut in the same depth and the same shape. Everybody has their requirements. To understand your need, at first, you have to know about the types of cigar cutter. There are total five types of cigar cutter which are used for different shapes during cigar trimming.
1. Cigar Scissor
These types of cigar cutters are of primary level. Cigar scissors are inexpensive in most of the cases. You will find many branded cigar scissors at a meager price. The scissor cuts your cigar as in depth you want. It slices up the head of the cap in a thin portion.
Cigar scissors are a particular type of scissors which are different from regular scissors of our toolbox. The blades are round-shaped and can cut cigars of almost every size. You can trim your cigar with a scissor. Whatever your cigar is; a Perfecto, a Parejo or a torpedo, the cigar type does not count.
The only one problem with a scissor is that you have to be away skilled to do so. Otherwise, you will end up with grouchy cigar cap and fractured wrapper. If a little imperfection does not scratch your mind, you can have cigar scissor in your cigar box.
2. Cigar Guillotine
Guillotine cigar cutter was the cutter of the period when people had just started to have a precise cut cigar. As far I know, guillotines are cheaper than other cutters. Again, you will find some of them which are way more expensive especially when they are from branded manufacturers.
The cutters are ageless and can show their magic everywhere. Most of the guillotines have a single blade and a plunger to push the edge. When the blade slides, it cuts the resting cigar on a round shaft. It trims the cigars same as cigar scissors.
Nowadays double-bladed guillotines are also seen in the market, and most of them have self-sharpening capability. Petit, Churchill, Lonsdale, Robusto, Diadema are cigars which can be cut in a guillotine.
3. Cigar Wedge Cutter/ V-cut Cutter
Wedge cutter cut the cigar in V-shape. The blades have a unique shape. Cigar experts consider them as an upgraded version of guillotine cutter. The blades are not flat in the front edges. They have angle edges which lead angle cut in a cigar. Generally, the wedge cutter scoops up a portion of the cap head in a V-shape. The types of cigars which can be trimmed in a V-cutter are the same as that of a guillotine.
Now, a question is beating in every mind of ours; What is the advantage or difference in a V-cut cigar brought by a wedge cutter? Meanwhile, the answer does not come in one sentence. Let me make you understand.
When a wedge cutter cuts the cigar in a deep depth along, however, the extent is not distributed along the whole top surface of the cigar cap. The cut takes only one-third of its total area. Thus, a smoker can draw in smoke with little effort as the retracting area is less than a flat cut. The blade is at a constant height and cannot be moved. So, there is no chance of deep cut or over trim and shorten the head which will be taken inside the mouth.
4. Cigar Puncher
Cigar puncher has a versatile function. You can use it as a smoke channeler and also as a channel cleaner.
So, if you have a cigar cutter, you need a cigar punch too.
Yes, you need one. Why am I saying so?
There are a lot of people who do not like the chewing taste of tobacco, but indeed they have no problem with their burned taste. In case of a cigar puncher, the smoker gets that option of having a cigar without its loose tobacco in their mouth.
The puncher makes one hole in the cigar cap. The gap is neither too thick nor too shallow. The people who are regular smokers encounter with difficulty in taking in the cigar after few draws. That happens because of the tar of the nicotine blocks the porous channel of the cigar cap and the smoke cannot be inhaled in your mouth nonetheless how much you try to draw the puff with heavy breath.
When this happens, you can throw off the situation if you make a hole in the cut with a cigar punch. So, the cigar punch is a cigar saver and helps our precious cigar from blown out.
5. Cigar Shuriken Cutter
Shuriken type cigar cutter is the invention of a new age. Generally, the cigar cut consists of 5-7 blades placed in a round path.
The cutter cuts the cigar in a concave hole. The blades are triggered by spring or manual knob. You can cut their almost every type of cigars.
Your shopping depends on your budget more than it depends on your wish. We all want to live a king’s life. But the money matter always cuts the king part, and we live lives. The issue does not change in case of buying a cigar cutter also.
There are plenty of cigar cutters of contrastive price ranges. Generally, straight cutters made of the wood frame comes in handy and cheap. Consequently, if you are looking for a branded one, you have to reckon a pocketful amount.
My suggestion is that if you are new, start with an inexpensive one and try out every type of the cutter to find out which one suits you. Buy a signature cigar cutter with the cost of multiple premium cutters if you are experienced and looking for doubling your collection.
14 Best Cigar Cutters of 2018
Check out our Top Cigar Cutter Reviews:
Best V-cut Cigar Cutter
- Spring-Loaded release
- Ergonomic design, v-shaped cutter, stainless steel blade
- Two year warranty, gift box included
Colibri is a famous name in the world of smoking gadgets. The latest product from the company is a super unique cigar cutter. The cigar cutter cuts the cigar in V shape in the edge. So, when we think about wasting our cigars by the round-cut cutter, this v-cut cutter can be a solution to save our golden stick beautifully.
The stainless-steel cutter body gives it durability for a lifetime. That is why the company has provided a lifetime warranty for the product because no one will never need to exchange it for any rust.
The smart structure with a slim fitness has made it placeable in your pocket or cigar humidor. The cigar cutter is very stylish and has a black finish on its entire body, and the silver pins have made it shinier and more adorable.
The spring-laden trigger makes a nice acute slice of cigars of more than 60 ring gauze. This cutter does not change the shape of your cigars, only makes an accurate path for channeling the smoke.
I would say that this is the best V-cut cigar cutter or wedge cigar cutter in the market and you will not get another one of the distinct qualities at this price range.
Best Straight Cut or guillotine cigar cutter
- The XO is a cutting machine, inspired by timeless design principles. The dual stainless steel blades operate on a patent pending planetary gear system, ensuring the blades open and close in perfect harmony, providing a guided and clean cut every time. The distinct, round aluminum body of the XO is built for relentless durability and exceptional performance. Engineered to simplify the standard double guillotine style cut.
The XO cutter is a bomb in the cigar accessories world. It is the best straight cut or guillotine cigar cutter in the market.
If I have to tell only one thing about the cutter, I would say about its look. The cigar-cutter is way beyond a stylish one and have a unique look which will pull you to the appearance of spaceship arbiter.
The blue disk which they called “planetary shape or gear technique” has taken the cutter in another dimension of look. The broad blue globular shape of the body and the black round knife have made it dashing and distinct from other cutters.
The aluminum block of the cutter is rustproof and scratchproof, and the cutter knife is very sharp. The round-edged knife can cut cigar of almost every ring diameter. As the cutting blade is very steep, the cut edge of the cigar comes out very cleanly.
Synchronic blade movement allows better control over cigar cutting. The black knife does not only provide a smart look but also provide a guideline about the depth during cutting. The sash flair cut gives a vertical cut to the cigar edge.
The blade is released by a spring button, and the spring button prevents cracking down the wrapper of the cigar. The price is bitty high, but when you think about its performance and durability, the price is acceptable in any thought.
Best Table-Top Cigar Cutter
- Easy-to-use lever operation
- Provides four different holes to cut two sizes of Guillotine- and V-style cuts
- Table-top cutter with polished aluminum construction
Here comes one of the cherished one of my collection. The cig cutter is colossal and so in its chore. I have few unportable cigar cutters, and the Large Table-top cutter of CigarExtras is the best among them.
The combined blade cigar cutter has a construction of cast iron containing four holes in the upper part of the table-top cutter. The cigar cutter is perfect for lounge or office environment. It rocks in a party, and you don’t have to lose your mind by repeated give to and take your cigar cutter from your guest. Place one tabletop cutter of CigarExtras in the middle of the party hall and get rid of pesky bespeak.
It has two straight cut blades and two v-cut blades. Both types of edges have two different sizes for the perfect cut of different ring-gauze cigars. The sharp-cut allows the smoker to have a precise-trimmed cig even if the smoker is a newbie.
There is a blade re-sharpening option in this cutter. You can do it by yourself. You have to take off the nuts and detach the blade. After that, you have to sharpen and assemble them again.
Rubber fit bottom prevents movement and rubber plug deposits wastage in it. And you can get the sizeable table-top cigar cutter at a very affordable price.
Best Punch Cutter
- 100% Pure Copper Body Cigar Punch, Proud by Nature.
- Hidden 2 Size Punch Blades Simply Screws Out and Retractable, Never Hurt Yourself When You Don't Have to.
- Pocket Sized Detachable Cigar Tools with Ring Buckle, Convenient to Clean and Carry.
- Delivered in a Handsome Gift Box, A Perfect Gift for the Upcoming Holidays or the Cigar Enthusiasts in Your Life, or Simply Purchase One for Yourself.
- Lifetime Warranty, Order with Confidence, Love Our Cigar Hole Punch or Your Money -Back Guarantee within 30 Days, No Questions Asked.
Generally, cigar punches are less used as a cigar cutter than as a block remover. Though the punches tend to wear out of sharpness and versatility, JIFENG® Zig-Zag Ripple Carving Cigar Punch is best cigar punch which shows sharpness and versatility even if during the prolonged and repeated uses.
1.6 oz weighted cigar punch is very lightweight which enables well-off transportation. It has cufflink at the one end of the punch machine. The cufflink facilitates carrying it as a key-holder.
In most of the cases, cigar punches are the best choice for preventing unraveling and cracking the wrapper. Thereby, Jifeng zig-zag cigar punch stands as the best cigar punch in the market. The total length is 3.5” and has a balanced weight to trim cigars precisely.
The bigger hole is of 9mm, and the smaller gap is of 7mm. Those two different punch holes provide excellent cutting of varying size cigars.
There are astounding geometrical shaped engraved on the surface of the punch. Those shapes have made it look more sophisticated and modern, though I found it bona fide and dropped from Egyptian culture.
The cigar comes in riffle settled parcel which has orange lower part and velvet black lid. When you flip over the cover, you will see a dynamic bronzy cigar punch waiting for trimming your cigars. You also can mark it by engraving your name on it.
- Rockwell C rating of 57
- the hardest, sharpest blade you can buy
- classic XIKAR shape
- lightweight nylon fiberglass composite in an assortment of metallic colors
- will cut a 54 ring gauge cigar in half
The body of the Noir cigar cutter is C rated in the scale of Rockwell which specifies the toughness of the configuration of the body metal. The hardness is 57 in this scale because of 440 chromium steel.
Maybe you will call the shape of the Xikar Xi2 as a metal flower petal. At least, it seems to me like that which works precisely opposite on a cigar cap. The cutter is a tiny one and perfectly fits in one hand. The surface of the cigar trimmer feels as emery paper while touching and the shiny, silver two middle portion is very smooth. The combination of the rough and smooth surfaces is very comfortable for handling.
If you want to cut a cigar of larger thickness, you can cut only a slight edge of the cigar crown. And from my experience, many cigar smokers prefer their cigars with small head-cut. The cutter is a semi-straight cigar cutter which has two blades triggered by a spring knob. The knob is a silver button and placed in the center of the cigar cutter. The modules can cut cigars of around 54 ring gauze.
- Brushed stainless steel, custom design by Alaska Bear brands.
- Excellent craftsmanship and solid construction.
- Self-sharpening double blades and cuts cigars clean and with precision.
- Hole diameter: 0.892 in. (22.66 mm), for all sizes up to 60 gauge.
- Comes in a cool gift bag, to keep and protect the cutters.
If you are looking for traditional cigar cutter which has the best craftsmanship, you can try out the double blade cigar cutter of Alaska Bear. The cigar cutter is unique and has made a significant position in my cigar cutter review.
The satin burnished stainless steel is used in configuring the body of the cutter. As a result, it is stable and long-lasting. You will find the cigar cutter with the conventional oval form which makes it portable and versatile in any occasion and place. The size is suitable to store the cutter in any humidors and takes less space so that you can keep lighter and other necessaries smoking accessories in your humidor easily.
The blade hole is of 0.9” and can trim the heads of up to 60 head gauze cigars. The blade is very sharp which cut the cigar cap as you want. While precise cutting, it leaves no unwanted scratch on the cigar foil and no unwanted pressure on cigars. Therefore, the cut comes out as neat and accurate as the requirement of the owner.
The cigar scissor from the Big Easy Tobacco Accessories is a pro in the cigar realm. It can trim up to 60 size cigars. The cigar person who does not believe in hole blade or acute one, can uncritically purchase this one and forget to buy another one for next 4 to 5 years.
The gripping hole of the cigar scissor is very comfortable and allows a better command over pin-point cutting. The handles have a color of matt black finish.
The cigar does not only help in trimming the cigar cap but also in adjusting the flame height of the lighter. The flame controlling option of the scissor dishes out the precise lighting of cigar and allows perfect fumes.
The whole scissor is adaptable and can be folded in only 2.6 inches. The poker tool in the grip handle has made it more functional in multi-cutting a cigar.
- SOLID METAL BLADE: 100% Solid stainless steel double cut blades cigar cutter. With Polished and Smooth finished cutting edge. This cigar cutter can cut cigars clean and with precision.
- ZEBRA WOOD: The cigar cutter body adopts zebra wood. Luxury look, excellent craftsmanship and solid construction. Ox Horns shaped body, ergonomic shape for easy to handle and give great grip.
- LOCK SYSTEM: Spring-loaded apparatus; easily open or close it with one hand when you use this cigar cutter. Good protection, avoid the blades opened by itself.
- CIGAR CUTTER SIZE: APPROX 76*57*7mm (2.99in * 2.24in* 0.27in); Hole Dia.: 22mm (0.866in);
- WHAT YOU GET: GALINER Cigar Cutter, cigar cutter box. Together with 30 Days Money Back.
The wood-bodied cigar cutter from G Galiner is very easy to fit on your pocket. Comparatively, it provides better performance in cutting a cigar. The wood which has a dark chocolate color appearance is taken from Zebrawood plant, gives a luxurious and elegant tone to the cigar cutter.
The trumpet shape of the cigar body has a length of 76mm and a width of 57 mm when closed and 79 mm when opened. The unique configuration allows a better grip while cutting with one hand and better impact on precise- cutting.
The vertical, double closure by blades consist 100 percent pure stainless-steel metal. The edge is fair polished and rust-proof. The diameter of the knife hole is 22mm which is suitable to cut cigars of around 57 ring gauze.
The cigar cutter comes with an astonishing gift box which makes it more presentable to its users. You can directly gift to someone just after buying it.
- Perfect Gift for Cigar Smokers
- Brushed Stainless Steel Finish
- Cuts Cigars up to 60 Ring Gauge
- Comes in Gift Box. Lifetime Warranty
The cigar cutter smiles up with a gorgeous gift box which has the signature matt black coating and logo of Mantello. The bivalent blades have chromium steel infrastructure, rounded edges.
The lunate shape of the cutting blade is very accurate and exact for hacking equal to 56 size cigars’ heads. Mantello dual-cut blades cig cutter is lightweight and small enough for easy takeaway.
The smoke cutter which has nail grip function comes up with sharpened edges mostly which cause a chance of hand cut. Contrariwise, the circular thumb and finger grips of Mantello cigar cutter have a brushed-up tune which makes the chopper satiny and free from sharp edges. Besides the shank also offers improved handgrip on minimum cutbacks of cigar corks.
The price is very affordable and budget-friendly. That is why the guillotine cig cutter of Mantello is satisfactory for greenhorn smoker who is looking for something cheap as well as hyperactive too.
VX cigar cutter of Xikar is another one cutter among the best cigar cutter which cut the cigar end in crew neck shape. The shape is mostly known as V-shape.
The V-shape cut in a cigar cap reduces the wastage and cut out proper smoke path. The narrow smoke path allows the smoker to take a large chunk of smoke in a small puff. Hence, better smoking can be experienced with a little effort.
The body of the cigar carver is made of gunmetal. Principally, the metal is one kind of bronze. Some may call the gunmetal “a red brass.” Whatever that is called, it is a solid metal that can resist any corrosion, steams and water. And that’s where Xikar VX cutter wins as being a long-lasting and durable cigar cutter.
The weight is only 45g, and the cutter has a right balance over a cigar and can cut any cigar of any ring gauze. You also can engrave it which allows you to hold a name or words of your beloved someone.
You will see many unique features in this cigar cutter of Cuban Crafters. Most of the users of Cuban Crafters have opted it best cigar cutter. Some may say that it is an all in one to cut cigars of every ring gauze. I also believe in so because it does that.
Firstly, there is no chance of over cutting. 40-size cigar head comes out in 2-3 mm by this cutter. The function is very satisfying for a stogie lover. After all, who wants to waste his love! It can cut cigars over 80 ring-gauze. In a case of a cigar cutter, the larger is better.
Secondly, the stylish cigar cutter is not only sharp but also has a self-sharpening feature which makes it outstanding than other cutters. Where your general cutter will go one to two years, the Cuban Crafters Dos Chabetas will go 3-4 years for this sharpening feature.
In the finishing, there is also a waste chamber which helps in keeping your room clean while having a rocking party where your stogies are the leading beauty.
- Dual Guillotine for a Smooth Clean Cut
- Spring-loaded Apparatus
- Teardrop Body Gives Great Grip
- High Quality Strong and Sturdy
- Lifetime warranty, contact seller to start a claim
The multiple straps of stainless steel are framed with polished zebra hardwood in Mantello lock system cigar cutter. Mantello claims a brand-new reflection of the cigar cutter. However, I find it holding an antic look, and I have to admit that I like the appearance more than the new one.
The lock system is impressive, and it allows safe handling while not in use. The blades are guillotine system and operated by horn-shaped plungers. The plungers cut the cigar’s head vertically when in motion. After getting through the work done, you can push the gilt button placed in the eye of the cigar cutter. Then you can keep the cig cutter in your pocket without the risk of cutting your other accessories.
As the blades are made of chrome steel, they have sharp edges, and rustproof functions hence provide a lifetime warranty.
The 3D cutter is a beauty in my cigar-cutter collection, and it always draws the attention of almost everyone. I have to confess that this one is an exclusive one and you will not find a single cigar cutter like this. The design of the cutter edges is inspired by Mayan culture. The Maya has gone, but you will see a little symbol of them in this cutter. It is not only a piece of cutter machine but also a relic of tradition and elegance.
The price is hefty, but the efficiency and appearance are the heavier. So, it balances the dollar unit. It comes with a gift packet and saves your money by buying a new package while gifting it to someone. The pack is elegant too and stands head to head with the cutter.
It can trim up to cigars of 70 ring gauze without having a loose flake in the cut edge. It also has self-sharpening features which make it more durable.
The cigar scissor of Cuban Crafters comes in a synthetic leather pouch which is black and has a company seal on it. The round scissor is full black in its whole body including the handles.
Circling rotation blades can be sharpened by themselves during each cut. As the blades are distributed in circle path, it becomes easier to cut round shaped cigar without giving vertical stress on cigars. The circular blades reduce the chances of cracked wrappers and broken edge cigars.
Cigars over of 60 ring diameters can be trimmed in the new Cuban Crafters scissor before lightening your mind with sweet fogs. The handles are well-crafted and of perfect shape which allows more massive and comfort grip while trimming your cigar.
Some like their cigars with thick cut, some like them with a light cut and Cuban Crafter Three blade cigar scissor offers you both.
A perfect cigar cut can make your time and release you from all stress. Hence, to have a precise cut smoke, best cigar cutter is warranted equipment in your cigar box. After all, we are not cavemen who could bite out the cigar tip with their teeth. So, we need the best cutter which is suitable and provides microscopy tailoring to our stogies.
Our stogies are overdelicate gold in a stick which we call our babies. These babies need a prissy creek bed for overhauling its mist. Hence, cigar cutter comes which helps our stogies to do so.
If your cigar is of the luxurious brand, you may be called wealthy. But when you carry a real cigar cutter, you will be named a full-bodied stag party person.
So, choose your cigar cutter wisely and carry the particular type according to the style of your surroundings while remembering, “There is no impression maker in a party as effective as an artistic and reliable cigar cutter.”